Table of Contents
Advertisement
Chapter 8: MENU mode/DISK UTILITY menu
Resume function On/Off setting [Resume]
Using the "Resume" menu item, you can select "On" or "Off" of the resume function.
By setting it to "On", the current audio file and its playback position is stored to the resume file
when a DVD-RAM disk is ejected or a partition is changed. Therefore, the unit automatically
loads the same audio file at the same position next time you set the same disk to the unit.
1)
While the unit is stopped, press the [SHIFT] key to light the [SHIFT] indicator, followed by
the [ENTER/YES] key.
The unit enters the MENU mode and the MENU list screen is shown.
2)
Use the [MENU] dial to select the "DISK UTILITY" menu and press the [ENTER/YES] key.
The display now shows the DISK UTILITY menu screen.
3)
Use the [MENU] dial to select the "Resume" menu item and press the [ENTER/YES] key.
The current option ("On" or "Off") starts flashing (the default is "Off") and you can now
select the desired option.
4)
Use the [MENU] dial to select "On" or "Off", and press the [ENTER/YES] key to confirm your
setting.
5)
Press the [EXIT] key repeatedly until you exit the MENU mode.
204
Location Recorder Model PD204
Flashing
Advertisement
Chapters
Table of Contents
