Fostex PD204 Owner's Manual page 112

Location recorder
Hide thumbs Also See for PD204:
Table of Contents

Advertisement

Chapter 6: Advanced operations
If you select "<All Select>" at the bottom of the file list on the screen and press the
[FILE SEL] key, all audio files are selected and checkmarked.
6)
After making audio file selection, press the [ENTER/YES] key.
The PD204 starts file copy to the destination medium (DVD-RAM disk or partition).
During file copy, the display shows estimated time and space remaining progress
indication for file copy. When file copy completes, "Completed!" is shown on the
display and the PD204 stops disk access.
<Note>:
copy source size, "Over copy size!" is shown and the display returns to the previous
screen for selecting an audio file.
<Note>:
matically finalized. While finalizing the disk, the popup screen as shown below ap-
pears. When you copy an audio file whose size is less than 1GB to a DVD-R/RW disk,
the unit must write readout area from the center of the disk to the 70mm diameter
position, resulting longer finalizing time.
We recommend using a CD-R/RW disk when you make a file copy of an audio file
whose size is less than 650 MB.
7)
Pressing the [EXIT] key repeatedly to exit the MENU mode.
<Note>:
the display shows "Write protected!" or "No Blank disk". In such a case, do the fol-
lowing.
• When a recorded DVD-R or CD-R disk is set:
After briefly showing "Write protected!", the display shows the screen for selecting
the drive of the copy destination. Change the disk.
• When a recorded DVD-RW or CD-RW is set:
After briefly showing "No Blank disk", the display shows the popup screen as below.
If you erase the disk, press the [ENTER/YES] key. If you do not erase the disk, press
the [EXIT] key. If erasing the disk is properly completed, the display automatically
returns to the execution screed for disk copy.
112
Location Recorder Model PD204
If the available recording space of the copy destination is smaller than the
After file copy to a DVD-R/RW or CD-R/RW is completed, the disk is auto-
If you set a recorded DVD-R/RW or CD-R/RW disk to the copy destination,

Advertisement

Table of Contents
loading

Table of Contents