Sampling Frequency And Bit Length Selection; Tc Recording Mode Setting; Clock Pull Up/Pull Down Setting - Fostex PD204 Owner's Manual

Chapter 5: Recording/Playback
<Note>: When the system clock is set to "DIGI" or "WORD", the FS of a file to be played
back must match the FS setting of the unit. Otherwise, you cannot play back the file.
In such a case, make the FS setting of the unit to match the FS of the file.

Sampling frequency and bit length selection [

You can select a sampling frequency and bit length combination.
You can select a sampling frequency and bit length combination also via the "Record FS&Bit"
menu item in the "SYS SETUP" menu of the MENU mode (see page
<Note>: The sampling frequency of the digital input signal must match the Fs/Bit
setting of the PD204.
<Note>: If you change the FS/BIT setting during recording, the new setting is not
valid until recording stops.
TC generator mode setting (TC recording mode) [
You can select the recording mode of the LTC generated by the internal TC generator or
external time code.
FREE (Free Run), Rec-R (Rec-Run), 24H-R (24H-Run), EXT (Ext Run)
You can also select the TC recording mode via the "Gen mode" menu item in the "TC SETUP"
menu of the MENU mode (see page 177).
<Note>: You can set the default LTC start time via the "Default LTC Start" menu item
in the "TC SETUP" menu of the MENU mode (see page 184).

Clock pull up/pull down setting [

You can make the pull up/pull down setting of the sampling clock/internal TC frame rate
when the clock reference is set to "INT".
You can also make the pull up/pull down setting via the "Pull up/down" menu item in the
"SYS SETUP" menu of the MENU mode (see page
<Note>: You cannot make pull up or down setting when the time code frame rate is
set to 25 fps. If you select "+0.1%" or "-0.1%" when the frame rate is set to 25 fps,
"+0.1%" or "-0.1%" is shown in the "UP/DW" field.
76
Location Recorder Model PD204
Available FS/BIT options (default: 48/24)
44.1/16, 44.1/24, 48/16, 48/24, 88.2/24, 96/24, 176.4/24, 192/24
Available TC recording mode options (default: Rec-Run)
Available pull up/pull down options (default: 0.0%)
+0.1%, 0.0%, -0.1%
]
]
]
143 for details).
142 for details).