Chasing External Tc (The Optional Model 8348 Required); Preparations; Chasing - Fostex DV824 Owner's Manual
Fostex dvd multitrack recorder owner's manual dv824
Hide thumbs
Also See for DV824:
- Brochure & specs (8 pages) ,
- Owner's manual supplement (8 pages) ,
- Owner's manual (4 pages)
Table of Contents
Advertisement
DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
DVD Multitrack Recorder DV824
Chasing external TC
The following explains how to chase-sync the unit to time code received from the
[TIME CODE INPUT] connector when the optional TC/SYNC card (Model 8348) is
installed.
In the following connection example, a VTR is a master, while the DV824 (with the
Model 8348) is a slave. The DV824 receives time code recorded on the master VTR
and chase the master. A word sync reference signal is also fed to the DV824 from the
master VTR.
8
7
1:GND 2:HOT 3:COLD
8
7
Analog mixer
Preparations
Before performing the chase function, set the following.
1)
Set the system clock reference to "Video".
You can set the system clock reference via the quick setup mode or the "Sync
clock" menu item in the "TC SETUP" menu of the MENU mode (see pages 47 and
127).
2)
Set the chase mode appropriately.
You can set the chase mode via the "Chase mode" menu item in the "TC SETUP"
menu of the MENU mode (see page 135). Three chase modes ("Once", "Continue"
and "Frame sync") are available. The default is "Once".
3)
Set chase offset if required.
By setting chase offset appropriately, the unit chases and locks to the master with
maintaining a time interval.
You can set chase offset via the "Chase offset" menu item in the "TC SETUP" menu
of the MENU mode (see page 136).
Chasing
1)
Starts playback of the master (in this example, VTR).
2)
Press the DV824 [CHASE] key to activate the chase mode (the [CHASE] indicator
starts flashing).
The DV824 chases the master time code. When lock is achieved, it starts playback
while the [CHASE] indicator is lit steadily.
3)
To stop chasing, press the [CHASE] key again (the [CHASE] indicator turns off).
HOUSE SYNC
Video Sync signal
6
5
4
3
2
1
ANALOG INPUT BALANCED [+4dBu]
ANALOG OUTPUT BALANCED [+4dBu]
6
5
4
3
2
1
or
(the optional Model 8348 required)
VTR
PARALLEL
P2/ES BUSS
REMOTE
INPUT
THRU
100
ON OFF
WORD
WORD
INPUT
OUTPUT
LEVEL SEL
BI-PHASE INPUT
75
5V
24V
ON
OFF
ETHERNET
DIGITAL I/O
TX/RX
LINK
Digital mixer
92
Time code
TIME CODE
INPUT
OUTPUT
DC-IN 12V
1:GND
2:NC
3:NC
4:12V
Advertisement
Table of Contents
