Slate Tone/Pop Tone Recording Mode Setting [Tone Rec Mode]; Slate Tone/Pop Tone Recording Mode Setting - Fostex PD204 Owner's Manual

Slate tone/pop tone recording mode setting [Tone rec mode]

The "Tone rec mode" menu item sets the recording time and mode of the slate tone, as well as
the recording mode of the pop tone. The slate tone is recorded at the beginning of a file, while
the pop tone is recorded at the end of a file. The setting is stored to the Flash ROM of the unit.
1) While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2) While "SYS SETUP" is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
3) Use the [MENU] dial to select the "Tone rec mode" menu item and press the [ENTER/YES] key.
You can make tone rec time, tone rec On/Off and end pop tone On/Off settings.
• Tone rec time setting
Use the [MENU] dial to select the "Tone rec time" and press the [ENTER/YES] key.
The current setting starts flashing.
Use the [MENU] dial to select a desired option and press the [ENTER/YES] key to confirm
your setting.
Selectable between "1sec." and "30sec." in one second steps (the default is "10sec.").
• Tone rec On/Off setting
Use the [MENU] dial to select the "Tone rec" and press the [ENTER/YES] key.
The current setting starts flashing.
Chapter 8: MENU mode/SYS SETUP menu
Options
Location Recorder Model PD204
Flashing
Flashing
147