Locating To The Desired Time - Fostex PD204 Owner's Manual

Chapter 5: Recording/Playback

Locating to the desired time

You can locate the recorder to the desired position by specifying the time value.
1) While the recorder is stopped (or playing back), press any one of alphanumeric keys.
The unit enters time edit mode and the EDIT TIME screen pops up on the display.
AUX
C1
MS
<Note>:
lected before entering time edit mode. In the screen example above, you can specify
the time value in LTC.
2) Enter the desired time value using the [MENU] dial (or alphanumeric keys).
You can move the field to be edited using the [
Pressing the [CLEAR] key resets the time value to "00h 00m 00s 00sf".
You can enter the time value between "00h 00m 00s 00f 00sf" and "23h 59m 59s **f
**sf" (** depends on the frame rate of the audio file).
3) After entering desired time value, press the [LOCATE] key.
The recorder quickly locates to the position at the specified time.
<Note>:
[LOCATE] key, "Out of Zone" is shown and the locate operation is not executed.
100
Location Recorder Model PD204
QUICK SET TIME FILE SEL LIGHT EXIT
POWER
ON
OFF
BATT
SHIFT TC SET DRV,PAT CONTRAST
ST
ACCESS
C2 MONO
L/M HDD DVD
R/S
PD204 LOCATION RECORDER
MONITOR
MIN MAX
PHONES
The time value can be specified according to the time display mode se-
If you enter a time value which is out to the current file and press the
space ABC DEF LOCATE
ENTER
YES
1 2 3
PREV CUE
GHI JKL MNO CLEAR
PRE REC
MENU
4 5 6
PQRS TUV WXYZ symbol
7 8 9 0
space ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PQRS TUV WXYZ symbol
7 8 9 0
] / [
FILE CUE CIRCLE TAKE
PAUSE REC
NEXT
JAM SLATE FALSE START
TONE
ON
OFF
OFF
MIC
] keys.