<4> 4 POP Tone Automatic Recording
When recording a file by the "NEW FILE" mode, 4 POP Tone can be automatically recorded at
the beginning of the file.
In order to do so, as explained below, turn the setting to ON in a newly added SETUP mode
"4POP Tone?" before recording.
Tips:
When recording by the "NEW FILE" mode, a new audio file is created together with the 4 POP Tone
(repeating 0.5 seconds of 1kHz reference level signal and 0.5 seconds of silence 4 times) at the
beginning of the file.
<NOTE>
While recording 4 POP Tone for 4 seconds, an audio signal cannot be recorded. Recording 4 POP
Tone is available only when the " NEW FILE " mode is selected. It is not available in the " INSERT "
mode.
• "4POP Tone?" Menu Setting
The setting is memorized in the internal flash ROM.
1. While the unit is in STOP mode, press the SETUP key.
2. Select the "4POP Tone?" menu by the JOG dial and press the [ENTER/YES] key.
The current setting (Default setting: "Off") flashes.
3. Select "On" by the JOG dial and press the [ENTER/YES] key.
The 4 POP Tone recording function is turned on. The setting is memorized in the internal flash ROM.
4. Press the [EXIT/NO] key (or [STOP] key) to exit from the SETUP mode.
<NOTE>
If you do not need to record the 4 POP Tone, set it to " Off ".
DV40 Owner's Manual <Version V1.2 Supplement>
SETUP
SETUP
17
Flashing
Flashing