Table of Contents
Advertisement
Configuring Parameters
Local Parameters
Set local parameters for your PC.
NOTE:
The local parameters may vary with models, please see the actual Web interface for details.
1.
Setting options
2.
Basic information, if click-in setting, there are shown parameter for selections.
3.
Shortcut entrance to common Configuration, you can one-click to enter relevant setting for IPC.
Select Setup to go into IP camera setting up menu.
1. Select Setup > Common > Basic Info.
It displays the basic information of the camera.
2. Select Setup > Common > Local Settings.
3. Modify the settings as required. The following table describes some major parameters.
A. Video Parameter
a. Processing Mode
17
Advertisement
Table of Contents
