Editing Projector Settings; Using A Slider To Set A Value - Digital Projection E-Vision Laser 15000 Series Installation & Quick Start Manual

Editing projector settings

If the highlighted menu item contains a list of values to choose from, you can change the value by doing the
following:
1. Highlight the menu item and press ENTER/OK.
2. In the list of values that opens, use the UP and DOWN arrow buttons to highlight a value, then press
ENTER/OK again to select the highlighted value.

Using a slider to set a value

Some parameters show a slider. To set such a parameter:
1. Press the LEFT or RIGHT arrow button, or ENTER/OK. The arrow buttons will open the slider and
adjust the value at the same time. ENTER/OK will open the slider without altering the initial value.
2. Use the LEFT and RIGHT arrow buttons to move the slider.
3. When ready, press RETURN to exit the slider and return to the menu.
Operating Guide
Using the menus
Menu Name
Highlighted Item
Menu Item
Menu Item
List of Values
Parameter
Digital Projection E-Vision Laser 15000 Series
Some menu items may be
unavailable due to settings in other
Current Value
menus. Unavailable menu items
Highlighted Value appear gray
Value
Value
Value
Value
Slider
Notes
Rev B April 2021
page 51