Table of Contents
Advertisement
Digital Projection E-Vision Laser 15000 Series
Projector indicators
TEMP.
l
Off = no problem
Flashing red = temperature error
LIGHT
l
Off = light is switched off
Flashing green (cycles of single flashes) = shutter is on and light is temporarily off
Flashing red (cycles of single flashes) = light cannot can't be ignited during warm up
Flashing red (cycles of double flashes) = light extinguished during normal operation
On, amber = light is in forced ECO mode at high temperature
On, green = light is switched on
STATUS
l
Off = no problem
Flashing amber (cycles of double flashes) = request to perform lens calibration
Flashing green (cycles of double flashes) = lens calibration in progress
Flashing red (cycles of single flashes) = cover error
Flashing red (cycles of double flashes) = TEC/color sensor problem
Flashing red (cycles of four flashes) = fan error
On, red = system error
POWER
l
Off = the projector is switched off
Flashing green = the projector is warming up
Flashing amber = the projector is cooling down to standby mode
Flashing red = the projector is preparing to go into network standby mode
On, red = standby mode, power saving without network control
On, amber = standby mode, power saving with network control
On, green = the projector is switched on
Rev B April 2021
page 28
Operating the projector
TEMP.
LIGHT
Indicators
STATUS
POWER
Notes
Installation & QuickStart Guide
Advertisement
Table of Contents
