Positioning The Screen And Projector - Digital Projection E-Vision Laser 15000 Series Installation & Quick Start Manual

Digital Projection E-Vision Laser 15000 Series

Positioning the screen and projector

1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that the projector is
level, and perpendicular to the screen.
The drawing shows the positions of the feet for table mounting, and the fixing holes for ceiling
mounting.
1
1. Four adjustable feet .
2. Six M4 holes for ceiling mount
into the body of the projector.
Rev B April 2021
page 24
2
. The screws should not penetrate more than 16 mm
Positioning the screen and projector
1
2
2
2
1
Notes
Always allow the projector to
cool for 5 minutes before
disconnecting the power or
moving the projector.
Ensure that there is at least 50
1
cm (19.7 in) of space between
the ventilation outlets and any
wall, and 30 cm (11.8 in) on all
2
other sides.
Do not use the threaded holes
for the adjustable feet to hang
or mount the projector.
2
2
1
Installation & QuickStart Guide