Overview - Valor HORIZON 534JN Installation Manual

Planning
Remote Handset Wall Holder
Fire ON/OFF Wall Switch (optional)
Front with barrier screen
(required, sold separately)
May be combustible (see note below).
Finished wall surface should be fl ush
or slightly forward of fi replace frame
for most applications. See instructions
provided with front trims.
Wall Finish
Flush
Forward
(534 recessed)
Combustible Floor
Hearth (if used) may be combustible. Install the bottom of
the heater fl ush with the top of the fi nished hearth for most
applications. See instructions provided with front trims.
WARNING
SAFETY WARNING! The Horizon is a very effective radiant heater.
HOT WALL SURFACES! The wall directly above the fireplace may be constructed of combustible
materials and, although safe, may become very hot when the fireplace is operating. Do not
touch! Finish the wall directly above the fireplace using materials and methods suitable for
elevated temperatures.
HEARTH/FLOOR SURFACES! The hearth/floor in front of the fireplace can get very hot. Locating
the unit raised above the hearth/floor and using the screen front will help reduce hearth
temperatures. Note that some materials, although safe can degrade due to heat—take this
into consideration when choosing materials.
Wall Finish
Note: This appliance may be installed in outdoor, weather protected
environments as defi ned in the GV60CKO Outdoor Conversion Kit
instruction manual.
Mantel/Shelf Clearances—see pages 8-9
Combustible framing allowed beneath fi replace. When the appliance is
installed directly on carpeting, tile or other combustible material other
than wood fl ooring, the appliance shall be installed on a metal or wood
panel extending the full width and depth of the appliance.

Overview

Framing—see page 12
Supplied with top facing vent outlet;
can be converted to rear facing
outlet—see page 23
534J Fireplace
11