Driftwood 534Dwk - Valor HORIZON 534JN Installation Manual

Installation

Driftwood 534DWK

Unpack the driftwood kit very carefully to avoid
damaging the fragile material. Install the components
as show below. Please note that the position of the
logs and pebbles (if used) is critical to ensure proper
performance of the appliance.
Platform
Place the platform into the fi rebox on top of the burner.
Logs
1. Identify the base log and place it in the cavity of the
ceramic platform. The protruding parts of the log
in the front should rest against the lip of the sheet
metal log support behind the burner.
2. Identify the rear log and place it on top of the base
log locating it into the notches on top of the log. Pulll
the log forward so it is locked in position.
3. Place the front log inserting its two pins into the two
holes at the front of the platform. The ends of the
log should be oriented towards the fron tas the log
should not hang over the inside edge of the plat-
form.
Fuel Beds
33