Table of Contents
Advertisement
7. Repair Information and Instructions
7.1 General
Always perform repairs to SOMNOsmart 2, SOMNOset and SOMNOsoft + at an ESD workplace.
•
Observe the safety information in the operating
instructions for SOMNOsmart 2, SOMNOset and
SOMNOsoft +.
•
All operations on this device require detailed
knowledge and observation of the Operating
Instructions and the Service and Repair
Instructions.
•
Do not carry out any repairs that are not
described in these Service and Repair
Instructions. This is the only way to guarantee
trouble-free functioning of SOMNOsmart 2,
SOMNOset and SOMNOsoft +.
Note:
The item numbers quoted in the following text are identical to the item numbers in the spare parts list on
Page 46 and the overview on Page 4.
Important!
These service and repair instructions are for the devices
SOMNOsmart 2, SOMNOset and SOMNOsoft +.
In most cases the description is the same for all three de-
vices. If this is not the case, the text draws attention to
the fact. The illustrations usually show the maximum
equipment level, with oscillation generator, microphone
and the relevant cables. Please note that SOMNOsoft +
does
have these components.
not
22
Repair Information and Instructions
•
Make sure that your hands and workplace are
clean during the repair work.
•
Be sure to carry out a test after
(see "5. Test the device" on page 15).
•
If you replace components or individual parts,
use only genuine Weinmann parts.
•
When ordering the lower part of the
housing
, please specify device type, year
42
of manufacture and device number.
Oscillation generator
SOMNOsmart 2, SOMNOset
SOMNOsoft +
repair
every
Advertisement
Table of Contents
