Checking Function Of Humidifier - Weinmann SOMNOsmart 2 WM 24900 Manual

5.2.6 Checking function of humidifier

1. Make a visual inspection of the plastic
housing:
If there are any cracks/damage or heavy
soiling, the plastic parts or seals must be
replaced.
2. Fill the humidifier up to the mark with water.
3. Check that the humidifier is not leaking.
4. Pour the water out.
5. Now pour in 50 ml water.
6. Click-fit the humidifier to the therapy device.
7. Insert the red drying adapter (supplied with the
therapy unit) in the outlet connection stub of the
humidifier.
8. Push the hose system onto the drying adapter.
9. Switch on the therapy appliance.
10. Switch on the humidifier by pressing the
Humidifier button
11. Select heating level 6 on the therapy device.
12. Check that the humidifier is heating up.
13. Remove the hose system by pressing the
adapter release catch.
14. Remove the red drying adapter from the
humidifier by twisting it slightly.
If servicing was completed successfully, reset the
service symbol (see "3.4 Resetting the service
symbol" on page 12).
on the therapy device.
19
Test the device