Printing A Funds (Postage) Report - Pitney Bowes DM100i Operator's Manual

6 • Adding Postage/Connecting to Data Center

Printing a Funds (Postage) Report

(only accessible at the mailing machine)
A funds report allows you to print a record of how much postage has
been used and how much is remaining in the machine.
1. Press Funds.
2. Press Page Down to the third screen.
◄Check PBP balance
◄Print Funds Report
3. Select "Print Funds Report".
4. At the insert envelope or tape sheet prompt, insert an envelope
or tape sheet into the machine. The machine prints the funds
report (see sample below).
5. Press Clear (back arrow key) or Home to return to Home
screen.
Used:
Available:
Total Pieces: 735
Control Sum: $464 . 270
– the total of all postage ever used in the meter
Used
– the amount of postage left in the meter
Available
Total Pieces
meter that had postage applied
Control Sum
the amount Used plus Available. This is a postal requirement that
verifies an accurate accounting of the postage in your meter.
Batch Count
plied since the last time the batch count was cleared
Batch Value
the batch value was cleared
PBP Serial No.
SV62276 Rev. C
$464 . 270
$000 . 000
– the total number of mail pieces run through the
– the total of all postage refills for the meter and equals
– the number of mail pieces that had postage ap-
– the amount of postage applied since the last time
– serial number of this meter (normally meter number)
Batch Count: 733
Batch Value: $464 . 270
PBP Serial No.: 0011969
JA N 0 7 0 8
9 : 5 5 P
6-13