Jeep COMPASS Owner's Handbook Manual page 85

6.
HYBRID INFO
Charge / Power
104 105
J0B6046E
"Charge" view: The green charging
indicator grows towards the left when
the regeneration phase is in progress or
when the heat engine is charging the
high-voltage battery.
"Power" view: The power is shown on the
instrument panel display by filling the
engine and/or battery section (when both
are operating in "HYBRID" mode) from
the top right centre, depending on the
power source used. The two indicators
will move independently.
"E-Drive Mode"
The "E-Drive Mode" function informs the
driver of the selected operating mode
("HYBRID" or "ELECTRIC" or "E-SAVE")
by showing dedicated messages on the
display.
TRIP/INFO TRIP (PETROL/DIESEL VERSIONS)
Press and release the
until the title of the Trip menu is shown
on the instrument panel display. Press
the or button to select Trip A or
Trip B. The following travel information
will be displayed:
Distance - this is the total distance
(in km or miles) travelled since the last
reset according to trip meter A or B.
Average consumption - this is average
fuel consumption (MPG, l/100 km
or km/l) according to trip meter A or B
from the last reset.
Elapsed Time - this is total travel time
since the last reset of trip meter A or B.
Hold the OK button pressed to reset the
5520584D
information on the functions.
TRIP/INFO TRIP (PLUG-IN HYBRID
VERSIONS)
This menu option allows you to view
"Trip computer" information.
The information shown on the instrument
panel display (for "Trip A" and "Trip B")
is as follows:
Distance travelled (in
"ELECTRIC" mode) (expressed in "km"
or "mi") (A) fig. 106 (7" display) / (1)
fig. 107 (10.25" display);
Distance travelled (in "HYBRID"
mode) (expressed in "km" or "mi") (B)
or button
83