Jeep COMPASS Owner's Handbook Manual page 390

(**) The specified standard charge
time is calculated for the maximum
level (5) "high" set on the Uconnect™
system display, which corresponds to
a maximum current consumption of
32 A. Selecting a lower power level
will increase the charging time in a
non-linear manner, up to a maximum
of 9 hours with level (1) "low" set on
the Uconnect™system display, which
corresponds to a current consumption of
6.4 A.
NAVIGATION
(where provided)
Press the "Nav" graphic button to show
the navigation map on the display.
You can use map view in the same way
as you might look at a traditional paper
map. You can move around the map
using gestures, and zoom using the zoom
buttons.
You can find your destination by
selecting it on the map, choosing a
saved destination (for example "Home" or
"Work") or searching for an address using
the "Search" button in the main menu.
After selecting the destination, a route
is planned and shown on the "Map
view" screen. The route bar appears on
the right hand side of the display and
provides an additional indication of
events along the route, e.g. accidents
and speed cameras. The arrival time and
remaining distance are also available.
388
You can choose to view the route via a
3D image in the "Guidance view".
NOTE The navigation system volume can
only be adjusted during navigation when
the system provides voice indications.
NOTE In some countries, the use of the
keyboard is only permitted when the car
is stationary. If an attempt is made to
enter text (e.g. an address) with the
car in motion or if driving is resumed
without having completed engagement,
a warning message will appear on
the display and the operation will be
ended. We recommend the use of voice
commands while driving.
Navigation main menu
In "Map view" or "Guidance view", tap
the "Main menu" button to open the
menu.
The following buttons are available in the
main menu:
"Search": select this graphic
button to search for an address, a
place or a point of interest, then
plan a route to the location.
"Drive Home": Select this button
to navigate to the location
registered as "Home". If this
button is displayed as "Add
Home", select this button to set
the location of your home.
"Drive to work": Select this button
to navigate to the location
registered as "Work". If this
button is displayed as "Add
Work", select this button to set
the work position.
"Recent": Select this button
to open the list of recent
destinations. Select a recent
destination to plan a route to that
destination.
"Favourites": select this button to
show the saved favourite places.
"Trips": select this button to show
saved trips.
"Maps": select this button
to display a list of installed
maps. The maps are updated
automatically.
"Settings": select this button to
open the Settings Menu. In the
"Settings" menu, you can change
the items shown on the navigation
display.
System buttons
The following buttons are available on
the different screens of the navigation
system: