Jeep COMPASS Owner's Handbook Manual page 281

Hide thumbs Also See for COMPASS:
Table of Contents

Advertisement

operational centre and make a voice call
to an operator.
NOTE If the Assist function does not
work, the system fault will be indicated
on the display. If this happens, go to an
authorised workshop to have the function
repaired as soon as possible.
NOTE The correct operation of the
ASSIST services will be guaranteed only
by a good network coverage.
WARNING The ASSIST function may not
be available for the first minute after the
car is started.
Privacy: GPS location is always active for
ASSIST. Deactivating it via the "Settings"
menu of the Uconnect™ system
will make some with other services
unavailable (see the "Settings" chapter of
the Uconnect™ system for more details).
WARNING The
icon at the top of the
Uconnect™ system display indicates
that the geolocation function is active
(ON). When geolocation is on, the
vehicle position is tracked to enable
the functions that require it. When
geolocation is off, the vehicle position is
only tracked by the navigation, safety,
insurance and driver assistance systems
(where provided). See the Uconnect™
system "Settings" chapter to deactivate
the function.
MANUAL ASSIST CALL
(where present)
Pressing the ASSIST button (where
provided) located on the rear-view mirror
or on the button (1) fig. 285 on the
display of the Uconnect™ system (where
provided) to call to one or more of the
following services:
Roadside assistance: if case of need, a
connection will be established with the
roadside assistance authority which will
receive the vehicle type and its position
directly. Additional roadside assistance
charges may apply.
Customer care (where provided):
Customer service to support all car
problems.
The LED on the ASSIST button located
on the ceiling light will turn green once
connected to an ASSIST operator and
will turn off when the connection is
ended.
NOTE If the ASSIST call button is
pressed by mistake, the call can be
ended by pressing the same button again
or by pressing the cancel button on the
Uconnect™ system display.
Once the connection has been
established, the following data will be
automatically transmitted, as authorised
by the customer:
indication that the occupant has made
an ASSIST call;
the brand of the car;
the most recent known GPS
coordinates of the car;
the type of error that occurred in the
car that automatically sent the ASSIST
request (in the case of an automatic call
- where provided).
The call will be made through the car
sound system to provide any additional
information about the assistance
request.
If the system is unable to establish the
voice call, or the line disconnects due to
insufficient coverage, the ASSIST service
will make several attempts to try to call
the operational centre.
WARNING If you have not subscribed to
the related services or the My Assistant
package has expired or is unavailable for
purchase, the ASSIST call will not be
available. For further information visit
the Jeep official website.
WARNING If the ASSIST call system
detects a malfunction, it is indicated by
the red LEDs on the internal rear-view
mirror and a corresponding message on
the Uconnect™ system display. Contact a
Jeep Dealership as soon as possible.
If an emergency call (SOS) is active and
an ASSIST call is requested, the latter
will not be delivered.
279

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents