Jeep COMPASS Owner's Handbook Manual page 148

blinking and will continue to blink. In
order to move your car to the side of the
road, you must follow the system reset
procedure.
NOTE Each step MUST BE held for at
least two seconds.
Driver's action
1. Take the ignition
device to STOP. (The
direction indicator
must be in neutral
position)
2. Take the ignition
device to the
ENGINE position.
3. Activate the right
direction indicator.
4. Put the direction
indicator in neutral
position.
5. ACTIVATE the left
direction indicator.
146
Driver's action
6. Put the direction
indicator in neutral
position.
7. Activate the right
Effect of the action
direction indicator.
8. Put the direction
indicator in neutral
position.
The right direction
indicator BLINKS.
The left direction
9. ACTIVATE the left
indicator is OFF.
direction indicator.
The right direction
indicator is ON
10. DEACTIVATE
FIXED. The left
the left direction
direction indicator
indicator. (The
BLINKS.
direction indicator
must be in neutral
The right direction
indicator is OFF. position)
The left direction
11. Take the ignition
indicator BLINKS.
device to STOP.
The right direction
indicator BLINKS.
The left direction
indicator is ON
FIXED.
Effect of the action Driver's action
The right direction 12. Take the
indicator BLINKS. ignition device
The left direction to the ENGINE
indicator is OFF. position. (The entire
sequence must be
The right direction
completed within
indicator is ON
one minute or you
FIXED. The left
will need to repeat
direction indicator
the sequence).
BLINKS.
SWITCH OFF the
The right direction
emergency lights
indicator is OFF.
(manually).
The left direction
If a reset procedure step is not
indicator BLINKS.
completed within 60 seconds, then the
The right direction
direction indicators will blink and the
indicator is ON
reset procedure must be performed again
FIXED. The left
in order to be successful.
direction indicator is
Airbag maintenance
ON FIXED.
188) 189) 190)
The right direction
Event Data Recorder (EDR)
indicator is OFF.
This car is equipped with an Event Data
The left direction
Recorder (EDR). The main purpose of
indicator is OFF.
an EDR is to record, in certain crash
or near collision-like situations, such
as an airbag deployment or hitting a
road obstacle, data that will assist in
understanding how the systems of the
car performed. The EDR is designed to
record data related to car dynamics and
safety systems for a short period of time,
typically 30 seconds or less. The EDR in
this car is designed to record such data
as:
Effect of the action
The system is now
restored and the
engine can be
started.