Jeep COMPASS Owner's Handbook Manual page 383

When a USB device is plug into the
port on the dashboard with the radio
on, it starts to play the tracks on the
device if the "AutoPlay" is set to "ON"
in the "Audio" menu. If the "AutoPlay"
function is set to OFF and a smartphone
is connected, only charging the device
will be active.
There may also be two USB-A and
USB-C ports behind the rear seats.
These sockets are for charging connected
devices only.
PHONE MODE
Press the "Phone" button on the display
to activate the Phone mode.
NOTE To consult the list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website
Select the desired page on the display
using the bar at the top to:
dial the phone number using the
graphic dial pad on the display;
NOTE The keypad is only active when
the car is stationary. If an attempt
is made to use the keypad with the
car in motion or if driving is resumed
without having completed engagement,
a warning message will appear on the
display and the operation will be ended.
display and call contacts from the
registers of previous calls;
display and call the contacts in the
phonebook of the mobile phone;
view received text messages (where
provided);
view the connected devices.
The mobile phone audio is transmitted
through the car's sound system; the
system automatically mutes the
Uconnect™ system audio when the
Phone function is used.
Pairing a mobile phone
WARNING Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving.
To pair a mobile phone, see the
procedure in "Pairing a Bluetooth
device" in this chapter.
"Double telephone" feature
The Uconnect™ system allows
simultaneous Bluetooth® connection to
two telephones. Only one of the two
connected devices can play multimedia
content via Bluetooth®.
WARNING The "double telephone"
feature is not available while using the
telephone in CarPlay or Android Auto
mode.
Making a phone call
The operations described below can
only be accessed if supported by the
mobile phone in use. For all functions
available, refer to the mobile phone
owner's handbook.
You can make a call by selecting one of
the following items:
"Keypad"
"Recent"
"Favourites"
"Contacts"
Favourites
You can add a number or a contact (if
already in Contacts) to the favourite list
during a call by pressing one of the 5
"Empty" graphic buttons on the upper
part of the display. The favourites can
also be managed by using the Phone
Book options.
Text Message Reader
audio
®
(where provided)
The system can read the messages
received by the mobile phone. To use
this function, the mobile phone must
support the text exchange function
through Bluetooth®.
If this operation is not supported by the
phone, the corresponding "Text message"
graphic button is deactivated (greyed
out).
When a text message is received, the
display will show a screen where the
options "Read", "Show", "Call" or "Ignore"
can be selected.
You can access the text message list
received by the cell by selecting the
"Messages" item (the list shows a
maximum of 60 received messages).
381