Jeep COMPASS Owner's Handbook Manual page 386

Text
Send a message to <contact> mobile /
work
Media
I want to listen to music
Play <track> by <artist>
Let me hear some <genre>
Show my playlists
Play album...
Play artist...
Play genre...
Play playlist...
Radio
I want to listen to music
Play <track> by <artist>
Let me hear some <genre>
Show my playlists
I want to listen to a radio
Play radio <name>
Play channel <number>
Tune to <frequency> <FM>/<AM>
Tune to <radio name>
Tune to <radio name> DAB channel
Navigation
See the "Navigation" paragraph below.
Climate
Set the temperature to <value>
I'm cold
Make it warmer
Turn down the fan
Turn on the A/C
384
HYBRID ELECTRIC PAGES
(where provided)
Proceed as follows:
select the "Vehicle" graphic button
on the Uconnect™ and then select "E-
Hybrid";
the list of available screens will be
displayed:
"Power flow";
"Driving history";
"Schedules";
"e-Save";
"Charge setting";
Power flow
Through the "Power flow" function
fig. 353 it is possible to see on
the display information related
to the distribution of the power
consumed/supplied by the systems:
"Engine" (power value, expressed in
kW, that the heat engine is generating).
Based on the car operating conditions,
this power is used for car movement, to
heat the passenger compartment, supply
the electric loads and charge the high-
voltage battery. The operation of the heat
engine is monitored in order to minimize
fuel consumption.
"Battery" (peak power value, expressed
in kW, that the high-voltage battery
is able to supply/ absorb. This power
supplies the front and rear electric
motors and car loads);
"Climate" (power value, expressed in
kW, that the automatic dual-zone climate
control system is using to maintain the
set air temperature value inside the
passenger compartment).
353
NOTE In deceleration energy recovery
operations ("eBraking" or "eCoasting") the
power value of the high-voltage battery
displayed on the Uconnect™ system
display may be negative.
NOTE The distribution of the power flows
is shown graphically using arrows on the
Uconnect™ system display.
Driving history (where provided)
Using the "Driving history" function,
you can see the graphs (relating to the
"Previous Week" and "Current Week") on
the display with information regarding:
"Distance travelled" (values expressed
in km or mi), fig. 354;
"Regeneration" (energy value,
expressed in kWh), fig. 355.
5520734D