Jeep COMPASS Owner's Handbook Manual page 253

park the car safely (automatic
transmission lever in position "P" - Park);
engage the electric parking brake;
switch off the engine;
remove the charging cable (optional)
fig. 257 from the boot (inside a special
bag), remove the protective cover (where
provided) on the two-colour connector
connector (4) and plug it into the socket
of the public charging station, fig. 258;
open the charging flap (1) fig. 259
located on the left side by pressing on
the area indicated by the arrow;
remove any dust that may have
accumulated on the charging connector
and charging port;
remove the protective cover (2)
fig. 260 from the charging port and
attach it to the device (3) fig. 260;
grasp the charging cable, remove the
protective cover (where provided) on the
connector (5) fig. 257 and plug it into
the charging port on the car until you
hear the click indicating that it has been
locked;
257
258
259
5520744D
J0B6067E
260
charging starts automatically.
5520614D
If necessary, the public charging
station must be enabled; follow the
manufacturer's instructions and warnings
when using the charging station;
during the charging phase, the first
LED located next to the charging port on
the car flashes green while the remaining
LEDs are on with steady light.
NOTE The charge procedure is
interrupted when opening the bonnet: a
dedicated message will be shown on the
instrument panel display. The charge will
be reactivated when the bonnet is closed
correctly.
2
5520617D
251