Factory Reset; Reset Via Lcd; Figure 126: Factory Reset Via Lcd - Grandstream Networks GSGVC3202 User Manual

FACTORY RESET

Users could reset GVC3200/GVC3202 to factory settings via the following ways: Reset via local GUI, via
Web page, via the reset hole on the back panel of GVC3200/GVC3202. Factory reset will delete
configuration info and syslog info.
--------------------------------------------------------------------------------------------------------------------------------------------
Warning:
1. Factory reset will erase all GVC3200/GVC3202 configuration information. Please back up all settings
or print useful information before making the following operations. If users lose all parameters or records,
Grandstream will not take responsibility for the damage or loss.
2. After factory reset, the remote control will not be paired to GVC3200/GVC3202 anymore. Please go to
GVC3200/GVC3202 LCD settings→Network→Bluetooth, select the menu buttons on the upper right
and click "Search New Devices". GVC3200/GVC3202 remote control "GS-RCU" with last 4 digits of the
remote control MAC address will show in the available device list. Select it to start pairing process on
GVC3200/GVC3202, immediately followed by pressing OK+5 keys on the remote control at the same
time. The remote control will be paired and connected to GVC3200/GVC3202 again.
-------------------------------------------------------------------------------------------------------------------- ------------------------

Reset via LCD

Go to GVC3200/GVC3202 LCD idle screen→Settings→Maintenance→Factory Reset, click on the
"Reset" button to bring up the prompt box as shown below. Click "OK" to reboot the device and restore
factory settings.

Figure 126: Factory Reset via LCD

GVC3200/GVC3202 User Guide
Version 1.0.3.64
P a g e | 152