Set Communication - ADF Web HD674-A025 User Manual

Industrial Electronic Devices

SET COMMUNICATION:

This section define the fundamental communication parameters of two buses, DMX Slave and Ethernet.
By Pressing the "Set Communication" button from the main window of SW674-A025 (Fig. 2) the
window "Set Communication" appears (Fig. 3).
The means of the fields for "DMX" section are:
In the field "DMX" it is possible to define if the converter will act as DMX controller ("DMX OUT")
or as DMX device ("DMX IN");
In the field "Channel Number" the number of channels of the DMX side is defined (up to 512
channels).
The means of the fields for "Ethernet" are:
In the field "IP ADDRESS" the IP address of the converter is defined;
In the field "SUBNET Mask" the SubNet Mask of the converter is defined;
In the field "GATEWAY" the default gateway of the net is defined. This feature can be enabled
or disabled pressing the Check Box field. This feature is used for going out of the net.
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual DMX / Ethernet - Converter
Document code: MN674-A025_ENG
Figure 3: "Set Communication" window
INFO: www.adfweb.com
Revision 1.000 Page 16 of 30
Phone +39.0438.30.91.31