Table of Contents
Advertisement
DP1100
2.4.2 Mounting DP1100
DP1100 can be mounted on a wall or a panel. To do this:
1) Open the decoder as described in paragraph 2.3.
If necessary, using the two mounting holes inside the DP1100 as a
pattern, mark the panel or the wall with an appropriate object and then
drill two pilot holes in the panel or in the wall.
2) Align the decoder and insert two appropriate screws (M5 x 35 UNI 6107
or M5 x 40) with their washers and then screw them into the panel or the
wall until tight (see figure 2.8).
2.8 - Installation
Figure 2.8 - Mounting DP1100
DATALOGIC
Advertisement
Table of Contents
