Wlan Module Installation - Toshiba B-EX4T2 Series Manual

2.PRINTER SETUP
2.1.1 WLAN Module
Installation
Please read below instructions and set up WLAN module to the printer
before use.
Assembly Instructions
<For B-EX700-WLAN-QM-R>
1) Insert the Wireless LAN Card into the slot.
2) Attach the Cover to the printer back with the two M-3x6 screws, as
shown below.
<For B-EX700-WLAN3-QM-S>
Fit the Antenna and LAN Cable as shown below.
NOTE:
Be sure to arrange the Antenna so that it is attached vertically.
8
M-3x6 Screw
M-3x6 Screw
Antenna
LAN Cable