Advertisement
86.
Attach remaining front and rear 82 1/8" long Facia boards to Facia Cleats on Batten and Outside
Ridge Cap edge with 10 - 1 1/2" finishing nails and 2 -1 1/4" screws. Use screws where Outside Ridge
Cap and Facia meet. Once again, line Facia up so it is aligned with rafter ends. Do a dry run with
Front and Rear and Side Facia to confirm correct positioning prior to attaching.
87.
Attach remaining Side Facia to roof rafter ends as per Step 85.
88.
Attach Facia/Trim Detail Plates and Pentagon Plates to cover seams where Facia Trim pieces
come together. Secure each with 4 - 1 1/2" finishing nails.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 41
sales@outdoorlivingtoday.com
Advertisement
