Advertisement
79.
Attach Narrow Wall Trims around the Sunshed. Narrow trims are used where wall panels come
together and leave a seam. Note: the Narrow Trim on the Short Wall side is only 79" long. Attach
with 8 - 1 1/2" finishing nails per piece.
Outside (2)
5 1/2" wide
80.
Locate all Ridge Caps for Polygal Panels (3 Mid / 2 Outside / 2 Center). Starting from the out-
side, position both 5 1/2" wide caps so outside edge is aligned with edge of batten and Cap end slides
under roof. Use a straight edge to aid in alignment. See below. When correctly aligned, attach Caps
to center of outside rafter with 6 - 1 1/2" finishing nails. Ridge Cap has nailing strip attached.
Toll Free 1-888-658-1658
Ridge Cap slides under Roof Panel and has nailing strip attached to
outside underside of it. Strips allows facia to attach easier when they
are nailed.
Mid (3)
Center (2)
2 1/2" wide
3 1/2" wide
Batten and
cap evenly
aligned.
www.outdoorlivingtoday.com
Cap overhangs rafter
end by approx 1/2"
Page 38
sales@outdoorlivingtoday.com
Advertisement
