Advertisement
72.
Attach Door Hinges to Top and Bottom Dutch Door sections. Top Door has trim overhanging
door at bottom while bottom door has trim recessed slightly. Hinges should be centered on door trim
with barrel nudged to end of trim. Use 2" & 3/4" black headed screws as shown above.
Bottom Door
2" Black
Bottom Skirting
Screws
73.
Place Bottom Dutch Door panel into position.
Gap 3/8" on bottom, evenly space on sides, and
attach hinge to doorway seam trim with 2" black
headed screws. Use shim to help keep the door
evenly spaced on bottom. One of the extra roof
shingles (see parts list) can be used.
75.
Attach Door Handle, Exterior Barrel Bolt and Interior Barrel Bolt to door. Handle is
positioned on top door, Barrel Bolt on bottom door, and Interior Barrel Bolt (silver) on top door stud.
Attach Black Barrel Bolt as illustrated above with 3/4" Black Screws. Note how female part of Barrel
Bolt is positioned higher than male part. Do a dry run first to position Barrel Bolt correctly.
Important: Drill pilot holes with 1/8" drill bit prior to securing to prevent wood from splitting.
Toll Free 1-888-658-1658
3/8" gap at bottom.
Evenly spaced on
sides.
www.outdoorlivingtoday.com
2" Screws
3/4" screw
Top and Bottom
Hinges centered
on door trim.
Slight gap.Top Trim overlaps
bottom trim to prevent water
from getting in.
74.
Place the Top Dutch Door Panel into place
and gap top and bottom trims on the outside
about 1/8" apart. On the inside, horizontal door
frames should be about 1/4" apart. Use a shim
once again to help you. Attach hinges to trim
with 2" black headed screws provided.
Temporarily
position
Interior Door Stop to
help
align
Interior
Barrel Bolt.
Page 36
Middle Hinges
centered on trims.
Bottom Door Trim
sales@outdoorlivingtoday.com
1/4" gap on
inside.
Advertisement
