34.
Lift completed Gable Section up and
place on top of front Wall Extendors. Move
Gable Section framing left to right to line up
with Wall Extendor framing. Use a straight
edge to check for correct alignment. When in
place, tack down Gable framing for now with
4 - 2 1/2" screws. Note: Gable alignment
may need to be adjusted after Rafters are
installed.
Straight Edge
Flashing
35.
Lift, align and attach Rear Gable Section as per Step 34.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
sales@outdoorlivingtoday.com
Page 19