Download Print this page

OLT SunShed Garden Shed SSGS1212-FJ-METAL Assembly Manual page 35

12x12 with metal roof-fj

Advertisement

E. Miscellaneous Section
Horizontal Gable Trim (4)
Angle Cut Facia (4)
Above Door Trim (2)
Flower Boxes (7)
Vertical Trim (5) 87"
Dutch Door with Hardware
Vertical Corner Trim (4)
Expert Advice:
When installing trim, sort pieces according to color and pieces that are most
pleasing to the eye. Start with least visible side and use the least desirable pieces first. Install trim to
most visible sides as your skill installing trim improves.
70.
Attach Bottom Skirting around the base of the shed. Skirting will hide floor framing. Gaps on
outside will be covered by Wide Trim pieces later. Start with front and rear skirting pieces first and
attach with 4 - 1 1/2" finishing nails per piece.
71.
Position
(2 - 1/2" x 2 1/2" x 87") on each side
of door opening. Right side will
sit
flush
with
Left side will sit flush on edge of
Narrow wall. Do a dry run with the
Horizontal Gable Trim (Step 90)
to
determine
of Trims. Attach with 8 - 1 1/2"
finishing nails.
Toll Free 1-888-658-1658
2
Door
Trims
Door
Jamb.
vertical
location
www.outdoorlivingtoday.com
Filler Trim (4)
Page 35
Facia Nailing Cleat (4)
Polygal Ridge Caps
Side Facia (4)
Facia Detail
Plates (4)
Vertical Trim (8) 79"
Bottom Skirting (12)
Gap in corner
Location determined
using
Horizontal
Gable Trim.
sales@outdoorlivingtoday.com

Advertisement

loading