Advertisement
C. Rafter Section
Ridge Boards (5)
Roof Rafters (18)
Important:
Locate all parts necessary to assemble each Rafter Section prior to beginning.
Parts for One Rafter Section
9 - 1 1/2" x 3 1/2" x 80 7/8" - Rafters
1 - 3/4" x 8 1/2" x 64 1/2" - Ridge Board
1 - 3/4" x 8 1/2" x 72" - Ridge Board
2 - 1/2" x 4 1/2" x 68 1/4" - Soffits
1 - Metal Ridge Board Connector
* Must complete 2 Rafter Sections
Follow Steps 36-38 to Assemble Rafter Sections. Make sure to complete on a flat, level surface.
Metal Ridge
Board Connector
Ridge Board (72")
36.
Locate 3/4" x 8 1/2" x 72" & 64 1/2" Ridge Boards and attach together with Metal Ridge Board
Connector using 8 - 3/4" screws evenly on boards. Total Length when connected is 136 1/2".
Complete two Ridge Boards.
Toll Free 1-888-658-1658
Gussets (3)
Ridge Board
(64 1/2")
www.outdoorlivingtoday.com
Parts for Other Rafter Section
9 - 1 1/2" x 3 1/2" x 80 7/8" - Rafters
3 - 3/4" x 8 1/2" x 45 1/2" - Ridge Boards
2 - 1/2" x 4 1/2" x 68 1/4" - Soffits
Remaining Rafter Pieces:
3 - 3/4" x 3 1/2" x 72" - Gussets
8 - 3/4" screws
Page 20
Metal Ridge Board
Connector (1)
Polygal
Roof Side
Soffits (4)
sales@outdoorlivingtoday.com
Advertisement
