Advertisement
64.
Locate Foam Enclosures for Metal Roof. Insert Foam Enclosures between lowest Batten
and Metal Roof Panels. Attach Roof Panel to lowest Batten with 6 - 2" Metal screws.
65.
Locate remaining Foam Enclosures for Metal Roof and Metal Ridge Caps (60" long).
Place Foam enclosures at the top of the roof panels. Foam Enclosures prevent moisture from
coming in through the top. Place 3 Metal Ridge Caps onto apex of roof. Evenly space from front
to back of shed. Caps will overlap eachother. Overhang the cap approximatley 1-2" past each end.
66.
When Ridge Cap is correctly positioned, secure with 12 - 2" metal screws (6 per side).
Screw into final Batten. Do not overtighten.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 33
sales@outdoorlivingtoday.com
Advertisement
