Advertisement
28.
Next, attach the 2 Side Top Plates. The side top plates are angle cut down the length. Once
again, position top plate on wall plate so it is flush with inside of wall plate. Side plate should also be
flush with Front Top Plate. Secure with 4 - 2" screws per piece.
Rear Top Plates
29
. Position remaining Rear and Side Top Plates on wall top framing to complete. Use 4 - 2" screws
per piece.
Lap Siding of panels
will fit together.
30.
Locate and place an Angled Wall Extendor on Rear Wall Top Plate. Position so Top Plate and
Extendor Wall angles line up and are flush with each other. When in place, secure with 4 - 2 1/2"
screws.
Toll Free 1-888-658-1658
Side Top Plates
www.outdoorlivingtoday.com
Page 17
Straight Edge to
line up angles
sales@outdoorlivingtoday.com
Advertisement
