Advertisement
Place 1" below
top edge of rafter.
46.
Start by attaching one Gusset onto
the middle rafters as illustrated. Attach
only 1 - 2" Screw per side for now.
Before attaching the rest of the Gussets,
recheck the inside-to-inside wall measure-
ments as done in Step 43. Use a level to
check for square.
Important: Pilot hole ends of Gusset to
prevent splitting.
47.
Once walls are confirmed to be square and plumb, attach the remaining 2 Gussets with
3 - 2" Screws into each end. Attach 2 - 2" Screws into each end of the middle Gusset which
was partially attached in Step 46.
Important: Pilot hole ends of Gusset to prevent splitting.
Toll Free 1-888-658-1658
www.outdoorlivingtoday.com
Page 26
sales@outdoorlivingtoday.com
Advertisement
