Advertisement
31.
. Locate and place the Middle Wall Extendor on Top Plate and flush with Angled Extendor Wall
framing. When correctly in place, secure with 4 - 2 1/2" screws. Complete remaining Angled Wall
Extendor attachment. Use 4 - 2 1/2" screws to connect Middle Wall to Angled Extendor Walls. See Step
32.
32.
. After completion of Rear Wall Extendors, complete the front wall Extendors following
Steps 30-31.
Flashing
33.
Locate Gable 1/2 Walls for both sides of
the shed. Align framing and wall siding lapp
together. Screw center wall framing of each
piece together with 3 - 2 1/2" screws.
Note: prior to attaching, try each combination
of Gables for best fit.
Toll Free 1-888-658-1658
Notched at top
Flashing
www.outdoorlivingtoday.com
Page 18
Male / Female
Lapp Siding
sales@outdoorlivingtoday.com
Advertisement
