Advertisement
10.
Position Plywood Floor pieces (6) on top of completed Floor Joists. Plywood will sit slightly
back from outside edge of Floor Joist Framing.
11.
With Plywood positioned correctly on floor framing, attach with 1 1/4" screws. Use screws every
16" (approximately 85 total). The Plywood is cut slightly smaller than floor framing. Keep plywood
seams tight.
Important:
your floor is level prior to proceeding
to the next step of wall assembly.
Toll Free 1-888-658-1658
Hint: Use a chalk
line to mark location
of floor joists to
determine
placement.
Check to confirm that
www.outdoorlivingtoday.com
plywood
pushed together
at seams
screw
Page 10
sales@outdoorlivingtoday.com
Advertisement
