Rigol VS5000 Series User Manual page 139

RIGOL
Vertical
A/D converter
Volts/div Range
Offset Range
Analog Bandwidth
Single-shot
Bandwidth
Selectable Analog
Bandwidth Limit
(typical)
Lower Frequency
Limit (AC –3dB)
Rise Time at BNC
(typical)
DC Gain Accuracy
DC Measurement
Accuracy, Average
Acquisition Mode
Delta Volts
Measurement
Accuracy
© 2008 RIGOL Technologies, Inc.
8-bit resolution, each channel samples simultaneously
2mV/div-10V/div at BNC input
±40V(500mV/div-10V/div)
±800mV(2mV/div -200mV/div)
200MHz (VS5202D, VS5202)
100MHz (VS5102D, VS5102)
60MHz (VS5062D, VS5062)
40MHz (VS5042D, VS5042)
25MHz (VS5022D,VS5022)
80MHz (VS5202D, VS5202)
80MHz (VS5102D, VS5102)
60MHz (VS5062D, VS5062)
40MHz (VS5042D, VS5042)
25MHz (VS5022D,VS5022)
20MHz
≤5Hz (at input BNC)
<1.7ns, <3.5ns, <5.8ns, <8.7ns, <14ns
On 200MHz, 100MHz, 60MHz, 40MHz, 25MHz respectively
2mV/div-5mV/div:
±4% (Sample or Average acquisition mode)
10mV/div-10V/div:
±3% (Sample or Average acquisition mode)
Average of ≥16 Waveforms with vertical position at zero:
±(4%×reading+0.1div+1mv), choose 2mV/div or 5mV/div。
±（3%×reading+0.1div+1mV）, choose 10 mV/div~5V/div。
Average of ≥16 Waveforms with vertical position not at zero:
±[3%×(reading + vertical position) + (1% of vertical
position) + 0.2div]
Add 2mV for settings from 2mV/div to 200 mV/div
Add 50mV for settings from 200mV/div to 5V/div
Delta voltage between any two averages of 16 waveforms
acquired under same setup and ambient
Conditions: ±(DC Gain Accuracy×reading + 0.05 div)
User's Guide for VS5000 Series
[4]
5-3