Rigol VS5000 Series User Manual page 38

2. Set up the Channel Bandwidth Limit
To use Channel 1 as an example, input a signal that contains high frequency
component.
Right-click the
function off. The oscilloscope is set to full bandwidth and will pass the high frequency
component in the signal.
Right-click the
function on. It will reject the frequency component higher than 20MHz.
2-6
button, the Channel window will appear. Turn the BW Limit
Figure 2-4
Close the BW Limit
button, the Channel window will appear. Turn the BW Limit
Figure 2-5
Open the BW Limit
User's Guide for VS5000 Series
Turn off the
BW Limit
20MHz BW
Limit
© 2008 RIGOL Technologies, Inc