Table of Contents
Advertisement
Set the Reference
Reference Waveforms are saved waveforms to be selected for display. The reference
function will be available after saving the selected waveform to non-volatile memory.
Click the Reference button in the Vertical menu, go to the Reference window.
Table 2-8 Reference Function
功能菜单
Display
Source
2-20
Figure 2-16
Reference Interface
设定
OFF
ON
CH1
CH2
MATH1
MATH2
MATH3
MATH4
User's Guide for VS5000 Series
说明
Close waveform reference
Open waveform reference
Select CH1 as Reference channel
Select CH2 as Reference channel
Select Math1 as Reference channel
Select Math2 as Reference channel
Select Math3 as Reference channel
Select Math4 as Reference channel
© 2008 RIGOL Technologies, Inc
Advertisement
Table of Contents
