Table of Contents
Advertisement
RIGOL
Triggering on the Video Lines
To trigger on the video lines, do the following steps:
1． Click
to display the Trigger menu.
2． Select Advanced
Video in Mode window.
3． Select the Source to CH1 in Setting window.
4． Select the Polarity to
in Setting window.
5． Select the Sync to Line Number in Setting window.
6． Set the line number in Line function using
.
7． Adjust the trigger level at the video sync pulse to get a stable trigger.
8． Adjust the horizontal scale to see a complete waveform on the screen.
Figure 3-8
Triggering on the Video Lines
© 2008 RIGOL Technologies, Inc.
3-9
User's Guide for VS5000 Series
Advertisement
Table of Contents
