Table of Contents
Advertisement
RIGOL
Self Calibration
The Self Calibration adjusts the internal circuitry to get the best accuracy. Use these
functions to calibrate the vertical and horizontal systems.
For maximum accuracy at any time, run this calibration if the ambient temperature
changes by 5℃ or more.
Before running this procedure, do these steps:
1. Disconnect any probes or cables from all channel inputs, otherwise failure or
damage to the oscilloscope may occur.
2. Click the Self Calibration button in the Utility menu.
Figure 2-50
Self Calibration Interface
NOTE:
The oscilloscope must have been working or warm-up at least 30-minutes before
running self-calibration to get best accuracy.
© 2008 RIGOL Technologies, Inc.
2-75
User's Guide for VS5000 Series
Advertisement
Table of Contents
