Table of Contents
Advertisement
1. Channel Coupling
To use Channel 2 as an example, input a sine wave signal with DC offset.
Right click the
button or select the Analog function in the Vertical menu, and
enter the Channel window. Set the Coupling to AC. In this setting, it blocks the DC
component of the input signal.
AC Coupling
Figure 2-2
AC Coupling Setting
Right click the
button or select the Analog function in the Vertical menu, to
enter the Channel window. Set the Coupling to DC. In this setting, it blocks the AC
component of the input signal.
2-4
© 2008 RIGOL Technologies, Inc
User's Guide for VS5000 Series
Advertisement
Table of Contents
