RIGOL
Apply Automatic Measurement as the following steps:
1.
Select the signal channel for measuring, select CH1 or CH2 according to the
signal of interest.
2.
To see all the measurement values, click All Measure in the Analyze menu, 18
measurement parameters will be displayed on the screen.
3.
Choose the measurement parameters: measure projects according to the
Horizontal measurement 、Vertical measurement under Analyze Also , you can
drag the left icons to the waveform interface directly.
Get the measured value on the screen; select the parameters of interest by clicking
the correspond button, and read the data on the bottom of the screen.
To Clear the measure values; click Clear Measure, and all auto measured values
disappear from the screen.
© 2008 RIGOL Technologies, Inc.
User's Guide for VS5000 Series
2-63