Table of Contents
Advertisement
RIGOL
1．Display and re-line up the digital channels
1） Turn on the Logic Analyzer window. Use the options in this window to set the
Channel ON/OFF, Wave Size, Threshold Type and Reset the waveform display
position.
2） Drag the digital channel sign to move the digital waveform to the designated
location.
3） Click the Reset button to reset the waveform position.
2．Set Threshold Type of Digital Channels
Select logic standard or User to define the threshold voltage.
© 2008 RIGOL Technologies, Inc.
Figure 2-11
Open the Channels of D0~D7
User's Guide for VS5000 Series
2-11
Advertisement
Table of Contents
