Rigol VS5000 Series User Manual page 67

RIGOL
Settings for Edge Trigger
An edge trigger determines whether the oscilloscope finds the trigger point on the
rising or the falling edge of a signal. Select Edge trigger Mode to trigger on Rising
edge or falling edge.
Table 2-13 Edge Trigger Settings
Function
Mode
CH1
CH2
EXT
Source EXT/5
AC Line
D15-D0
Rising
Slope
Falling
Auto
Sweep
Normal
Single
Set Up
© 2008 RIGOL Technologies, Inc.
Setting
Select the trigger mode to Edge
Select CH1 as trigger signal
Select CH2 as trigger signal
Select EXT TRIG as trigger signal
Select attenuated EXT TRIG/5 as trigger signal
Select power line as trigger signal
Select a digital channel in D15-D0 as trigger
source (for VS5000D only)
Trigger on rising edge
Trigger on falling edge
Acquire waveform even no trigger occurred
Acquire waveform when trigger occurred.
When trigger occurs, acquire one waveform
then stop
To go to the Set Up menu
User's Guide for VS5000 Series
Description
2-35