Removing The M.2 Ssd Module; Installing The M.2 Ssd Module - Dell EMC XC Core XC450 Installation And Service Manual

Next steps
1. If applicable, install the M.2 BOSS
2. Follow the procedure listed in

Removing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the M.2 BOSS
4. Remove the M.2 BOSS card from the M.2 BOSS
Steps
1. Using the Phillips #1 screwdriver, remove the screws securing the M.2 SSD module to the BOSS card.
2. Pull the M.2 SSD module to disconnect from the connector on the M.2 BOSS card.
Figure 76. Removing the M.2 SSD module
Next steps
1. If applicable, install the M.2 BOSS card into the M.2 BOSS
2. If applicable, install the M.2 BOSS

Installing the M.2 SSD module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. Remove the M.2 BOSS
4. Remove the M.2 BOSS card from the M.2 BOSS
Steps
1. Align the M.2 SSD module at angle with the connector on the M.2 BOSS card.
2. Insert the M.2 SSD module until it is firmly seated in M.2 BOSS card connector.
72 Installing and removing system components
riser.
After working inside your
Safety instructions.
Before working inside your
riser.
riser.
Safety instructions.
Before working inside your
riser.
system.
system.
riser.
riser.
system.
riser.