Figure 32. Installing a drive into the drive carrier
Next steps
Install the drive
carrier.
Drive backplane
This is a service technician replaceable part only.
Drive backplane
Depending on your system configuration, the drive backplanes supported for XC450 system are listed here:
Table 7. Supported backplane options for XC450 system
System
XC450
Figure 33. 4 x 3.5-inch drive backplane
1. BP_PWR_1 (backplane power and signal cable to PIB)
Removing the backplane
Prerequisites
CAUTION:
To prevent damage to the drives and backplane, remove the drives from the system before removing
the backplane.
Supported hard drives options
3.5 inch (x4) SAS, SATA backplane
Installing and removing system components
39