Dell EMC XC Core XC450 Installation And Service Manual page 9

Table 2. Features available on the rear of the system (continued)
Item Ports, panels, or slots
2 BOSS riser
3 PCIe expansion card riser
2c
4 Power supply unit (PSU 1)
5
Power supply unit (PSU
2)
6
System identification
button
8 USB 3.0 port
9 USB 2.0 port
10 iDRAC dedicated port
12 NIC ports
For more information about the ports, see the Dell EMC XC Core XC450 Technical Specifications on the product documentation
page.
Icon Description
N/A Enables you to connect BOSS card.
N/A Enables you to connect PCI Express expansion cards.
Indicates the PSU.
Indicates the PSU.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for 16 seconds.
NOTE:
● To reset iDRAC using system ID, ensure that the system ID
● If the system stops responding during POST, press and hold
This port is USB 3.0-compliant.
This port is USB 2.0-compliant.
Enables you to remotely access iDRAC. For more information,
see the iDRAC User's Guide at
poweredgemanuals.
The NIC ports that are integrated on the system board provide
network connectivity. These NIC ports can also be shared with
iDRAC when iDRAC network settings are set to shared mode.
button is enabled in the iDRAC setup.
the system ID button (for more than five seconds) to enter
the BIOS progress mode.
https://www.dell.com/
Dell EMC XC Core XC450 system overview 9